CS Unitec Tools
Concrete Scarifier Drums & Deck Crawler Drums
CS Unitec scarifier/deck crawler drums are engineered to handle the most demanding concrete scarifying, planing and metal deck scaling applications. Find below our wide range of drum sizes and cutter assemblies to fit, 2″, 4″, 8″ and 10″ cutting width Scarifiers. All CS Unitec scarifiers are supplied with a drum and cutter assembly pre-mounted, get right to work, save time and increase productivity. Our walk-behind scarifiers also include a quick mounting drum system for easy drum change-out.
Request a QuoteFeatures
- Robust webbed and double-webbed drum designs
- Up to 5/8″ thick cutting shafts
- Engineered for long-life and continuous use
- Simple operation and low-maintenance
- Quick-mounting side-access drum system for all floor model scarifiers. Reduces the risk of hand and impact injuries.
- Up to 1/4″ of removal per pass
- Engineered for high-production and removal rates
- Over 6 different cutter/grinding teeth options (For CSP 1, 3-9)
- Quick mounting system for easy drum changeout on all floor models
- Use on concrete, asphalt, stone, metal, and more
Specifications Table
HAND-HELD SCARIFIER DRUMS
Model | Description | For Models |
438.0209 |
2″ Wide Drum Assembly For Star / Beam Cutters |
|
438.0409 |
4″ Wide Drum Assembly For Star / Beam Cutters |
|
312.D210 |
2” Shafts For Star / Beam Cutters (4 per set) |
|
312.D410 |
4” Shafts For Star / Beam Cutters (4 per set) |
|
438.0209 |
2″ Wide Drum For C Flaps |
|
438.0409 |
4″ Wide Drum For C Flaps |
|
312.D213 |
4” Pins For C Flaps Drum (6 per set) |
|
312.D413 |
4” Pins For C Flaps Drum (6 per set) |
|
438.0220 |
2″ Wide Drum Assembly with Star Cutters |
|
438.0420 |
4″ Wide Drum Assembly with Star Cutters |
|
438.0209 |
2″ Wide Drum Assembly with Beam Cutters |
|
438.0409 |
4″ Wide Drum Assembly with Beam Cutters |
|
438.0209 |
2″ Wide Drum Assembly with C Flaps |
|
438.0409 |
2″ Wide Drum Assembly with C Flaps |
FOR TFP 200 (8″ SCARIFIERS)
Model | Description | For Model | IMPA | ISSA | Applications |
320.002H |
8″ Wide Drum Assembly |
TFP 200 |
59.22.47 |
55.096.16 |
With cutter and brush accessories create a wide range of surface profiles. Remove cocrete, paint, corrosion and more. |
320.060G |
8″ Wide Re-enforced Grooving Drum Assembly |
TFP 200 |
N/A |
N/A |
With TCT cutters create grooved profiles in concrete for non-slip sufacing and drainage channels. |
320.0020 |
(4) 8″ Wide Cutter Shafts |
TFP 200 |
59.22.49 |
55.096.18 |
– |
320.1020ST |
8″ Wide Drum Assembly with TCT Cutters |
TFP 200 |
N/A |
N/A |
For creating a heavy surface profiles CSP ratings 6-9. Reduce, remove, and roughen concrete, coatings, corrosion and more. |
320.1020G |
8″ Wide Double-Enforced Drum Assembly with TCT Cutters |
TFP 200 |
N/A |
N/A |
For creating grooved profiles in concrete for non-slip sufacing and drainage channels. |
320.1020SS |
8″ Wide Drum Assembly with Star Cutters |
TFP 200 |
N/A |
N/A |
For creating medium surface profiles CSP ratings 4-5. Reduce, remove, and roughen concrete, laitance, paint, coatings, corrosion and more. |
320.1020SB |
8″ Wide Drum Assembly with Beam Cutters |
TFP 200 |
N/A |
N/A |
For creating a light surface profile CSP rating 3-4. Reduce, remove, and roughen concrete. Remove coatings, lataince, grease, dirt, corrosion, ice and more. |
320.1020SM |
8″ Wide Re-enforced Drum Assembly with Milling Cutters |
TFP 200 |
N/A |
N/A |
For removing thick and soft materials such as thermoplastics, mastic, waterproofing membraines, glues, plastics and similar. Leaves a light surface profile CSP ratings 3-4. |
320.9620 |
8″ Wide Drum Twisted Knot Wire Brush Assembly |
TFP 200 |
59.22.45 |
55.096.13 |
– |
320.9610 |
8″ Wide Drum Crimped Wire Brush Assembly |
TFP 200 |
59.22.44 |
55.096.14 |
– |
FOR TFP 260 (10″ SCARIFIERS)
Model | Description | For Model | Applications |
326.06DW |
10″ Wide Double-Enforced Drum Assembly |
TFP 260 |
With cutter accessories create a wide range of surface profiles. Remove cocrete, paint, corrosion and more. |
326.060G |
10″ Wide Re-enforced Grooving Drum Assembly |
TFP 260 |
With TCT cutters create grooved profiles in concrete for non-slip sufacing and drainage channels. |
326.0016 |
(6) 10″ Wide Cutter Industrial Shafts |
TFP 200 |
– |
326.1016ST |
10″ Wide Double-Enforced Drum Assembly with TCT Cutters |
TFP 260 |
For creating a heavy surface profiles CSP ratings 6-9. Reduce, remove, and roughen concrete, coatings, corrosion and more. |
326.1016GT |
10″ Wide Re-Enforced Drum Assembly with TCT Cutters |
TFP 260 |
For creating grooved profiles in concrete for non-slip sufacing and drainage channels. |
326.1016DS |
10″ Wide Double-Enforced Drum Assembly with Star Cutters |
TFP 260 |
For creating medium surface profiles CSP ratings 4-5. Reduce, remove, and roughen concrete, coatings, corrosion and more. |
326.1016DS |
10″ Wide Double-Enforced Drum Assembly with Beam Cutters |
TFP 260 |
For creating a light surface profile CSP ratings 3-4. Reduce, remove, and roughen concrete, coatings, corrosion and more. |
326.1016DM |
10″ Wide Double-Enforced Drum Assembly with Milling Cutters |
TFP 260 |
For removing thick and soft materials such as thermoplastics, mastic, waterproofing membraines, glues, plastics and similar. Leaves a light surface profile CSP ratings 3-4. |
Delivery Reach
We deliver throughout North America. From the moment an order is received, our total focus is to ensure deliveries are shipped out as soon as possible and meet the exact specifications requested.
Need Assistance
Not sure how to operate your equipment? Don’t know which model is best for your project? If you have any technical questions, please feel free to call us at 1 (800) 461-1847.